Air conditioning equipment
Square Ceiling Diffuser
Rectangular Ceiling Diffuser
Nowadays, saving space in homes and buildings Originally, it was necessary to put the air conditioner on the floor. However, nowadays, many houses have limited space. Putting the air conditioner on the ground wastes the usable space below and also makes the air compressor dirty easily because when it rains, water from the ground will splash on it immediately. Therefore, installing an air conditioner using an air conditioner hanger attached to the wall is considered a better choice for general houses, especially houses with many floors because it will make the distance between the air conditioner and the compressor shorter. Installing the air pipes is also easy because the pipes are not long. It requires less force to send out the liquid. And importantly, when cleaning the air conditioner, it is easier to spray water than to set the air conditioner on the floor using rubber air conditioner supports.
Capacitor
A type of electronic device designed to store energy in the form of an electric field. We can usually find this on almost every electronic circuit board, such as air conditioners.
Pipe cutter
VCT-32 is a high quality alloy steel for heavy duty cutting, durable and strong.
[Ergonomic design]
The ergonomic handle is comfortable and stable, you can cut the straws quickly and easily.
[Cutting capacity range] Suitable for pipes with diameter 4-32mm/5mm-50mm.
The cutter is small and delicate, can be used in small places, let you use more freely, cut the pipe⠀⠀easily and quickly, save a lot of time and labor.[Clean Cut] The cutter works smoothly and cuts cleanly. Simple and convenient to use, suitable for personal and professional use.
Cold Pipe Insulation
MM x MM x MM
06 x 09 x 1800 / 10 x 09 x 1800
13 x 09 x 1800 / 16 x 09 x 1800
19 x 09 x 1800 / 25 x 09 x 1800
32 x 09 x 1800 / 42 x 09 x 1800
Hole size in inches
* 6 mm.- 2 inches or 1/4
* 10 mm.- 3.150 inches
* 13 mm.- 4.094 inches
* 16 mm.- 5.039 inches
* 19 mm.- 5.984 inches
This type of rubber insulation is often used for internal structural work or various systems in particular. It is usually a thick rubber sheet made from special materials. The system that we often see using rubber insulation with heat is the cooling system or inside various types of air conditioners.
**Heat-resistant rubber insulation has a longer service life because it has a low and constant heat conductivity, so it has less impact on usage and is more durable than other types of insulation.
**Heat-resistant rubber insulation is smooth and tight, reducing the problem of water leakage and moisture.
**Heat-resistant rubber insulation is highly flexible, easy to install, quick and convenient, and more beautiful.
Access Panel
It is a square hole made from gypsum board or good quality plastic and attached to the ceiling. It consists of a frame and a cover panel that can be opened. Although it is just a square hole, do you know that this service channel is important in facilitating the convenience of being able to open it to repair or check the systems under the ceiling, such as water pipes, cables, electrical wires, etc., without having to remove or dismantle the entire ceiling panel? It is popularly installed in the ceiling of the bathroom, kitchen, living room, at points where various systems are installed under the ceiling.
– Easy to install, easy to open and close, strong and durable
- Beautiful shape, suitable for houses or commercial buildings
- The height can be adjusted as needed. The card slot, wire slot and sleeve do not require screws, and repeated disassembly will not be damaged.
- Thickening and mechanical design always drill 3-5 anti-separation holes.
- It can reduce construction waste in the rapid installation project and save scheduling time.
FLARING SWAGING TOOL KIT
- VALUE VFT-808 MII can flare pipes with sizes 5/16″, 1/4″, 3/8″, 1/2″, 5/8″ and 3/4″ inches. The product comes with a durable, strong blue hard storage box.
- Easy to use, reducing the time spent on the process. Designed specifically for refrigerant pipes.
- Can flare up to 45 degrees. With a system to prevent pipes from breaking.
- Designed with a rotating handle for easy rotation, not wasting energy.
Tube bender
- Large box, can bend pipe OD size 1/4 in, 5/16, 3/8, 1/2, 5/8, 3/4 and 7/8 in for bending copper pipe or aluminum pipe as desired. The set comes with a set of pipe benders and pipe cutters of various sizes. All sizes DSZH CT-999 F model (F model can bend pipes in reverse bending, front-back). This is a premium model. The material of the bender is aluminum alloy. Therefore, it can bend hard pipes without causing notches during bending. And has a longer life than the general CT-999 model. The bender is designed to save energy. With a squeeze bending rod, it is easy to control the bending angle of the pipe.
Flexible Conduit
6″ x 8 m.
8″ x 8 m.
-
- Flexible pipe covered with aluminum foil Designed for low, medium, high air pressure. Can be used with both hot and cold ducts.
- Made from strong and durable materials. The wire is high-tensile steel spring wire, covered with fiberglass insulation and covered with aluminum foil moisture-proof sheet.
insulation tape
- It is a product designed for use in attaching objects that are used in high temperatures or used to prevent high heat workpieces from coming into contact with other parts so that the equipment is not damaged, so that the tool can be used at full efficiency. Most products in this group are often used in industrial work, low-voltage and high-voltage electrical work, and electronic work.
Double Sided PE Foam Tape
-
Single-sided coating with high-performance adhesive, resistant to moisture, weak acid, oil and fat, good adhesion, strong crack resistance, high strength, good vibration damping, high temperature resistance, high sealing properties. EVA double-sided tape is widely used for permanent fixing, for irregular surfaces, for fixing decorative objects in cars, machinery or houses.
It can be used for anything from doors, vents and windows to air conditioners, plumbing insulation, hvac and more.- Automotive industry: Assembling cars and various vehicles.
- Electronic industry: Digital electronic products and home appliances, etc.
Aluminum Foil Tape
-
Made from aluminum foil, this tape is more special than general adhesive tape. The adhesive of aluminum tape is also an acrylic adhesive that can withstand hot and cold temperatures very well. It is also strong and durable, can be applied to many surfaces, and can be used in many ways.
Circuit breaker
-It is an automatic electrical switch designed to protect electrical circuits from damage caused by excess electric current. – It is a device used to protect against overcurrent or short circuits, similar to a fuse, but the difference is that once the circuit is cut, it can be closed or reconnected immediately after solving that problem.
Vacuum pump FY-1H-N
- High pumping rate design Single-stage rotary impeller design
- The pump body adopts the overall structure design
- Necessary oil inlet structure design
- Anti-backflow structure design
- Gas ballast design to reduce the degree of condensation of suspicious vapor in the pumped gas
- Filter design can filter moderate oil mist and reduce pollution
- The material of the whole machine body is made of die-cast aluminum to reduce the weight of the whole machine
- Built-in motor protector makes the operation safer
Voltage 220V ~ / 50Hz Pumping speed: 3.6 m ⊃ 3; / H
Maximum pressure: 2Pa Motor power: 150 W
Oil filling volume: 150 ml Dimensions: 255X105X202 mm.
Weight: 4 kk. Inlet connection thread: 7/16″-20UNF
Vacuum pump FY-2C-N
-
Voltage 220V ~ / 50Hz Pumping speed: 7.2 m/h
Maximum pressure: 2X10-1P Motor power: 370 W
Oil filling volume: 330 ml Dimensions: 337X138X244 mm.
Weight: 10.5 kk. Intake connection Thread: 7/16″-20UNF
High-precision integrated cylinder structure and the best vacuum
High precision vacuum gauge for accurate readings
Water valve structure to prevent backflow for sure.
Vacuum pump V-i280SV
-
Aluminum casting tank, frame, pump motor shell weight, metal bottom plate
The design of the two-stage rotating impeller improves the best vacuum.
With internal vacuum pump, which can create a constant pressure of oil supplied to the pump chamber and plain bearings,
the intake port is equipped with high-quality solenoid valve and vacuum table. When the pointer reaches the zero position, the work is completed, the system will automatically cut off after being pulled out, which can effectively prevent the vacuum pump oil into the container.
The gas ballast valve in the amount of gas that cannot be condensed to the dust chamber to reduce the gas will be pumped to the condensate level in the pump.
The intake filter can effectively prevent foreign matter from entering the pump chamber. The components can effectively separate the oil mist from the exhaust.
Aluminum casting tank, frame, pump motor shell weight, metal bottom plateVoltage 220V ~ / 50 Hz Pumping speed: 14.4m3 / h
Maximum pressure: 2X10-1Pa Motor power: 750 W
Oil filling volume: 500 ml Dimensions: 395X145X318 mm
Weight: 16.2 kk. Intake connection thread: 7/16″-20UNF
PLASTIC "CANOPY" PROTECTIVE COVER
- Spare parts for ventilation pipes, ventilation vents, exhaust vents, portable air conditioners, DIY models, air vents, air vent reinforcement, made of strong ABS plastic, high heat resistant
WEDGE ANCHOR.
-
Concrete anchors, ceiling anchors
– Used for heavy-duty, high-tensile work
– Designed for steel structures and walls for longer service life
– Suitable for installing balcony railings
– Installing shelves (Racking)
– Installing steel column bases to support metal sheet roof frames
– Installing hanging walls (Curtain wall)
– Installing advertising steel frames
– Hanging air conditioners
Charge gauge cable / refrigerant gauge cable
VRP-U-R
VRP-U-Y
VRP-U-B
1 set has 3 lines (red, yellow, blue)
For R22, R12, R134A, R410A refrigerants
Cable length 120 centimeters
Connector SAE 1/4 ‘-5/6
Pressure resistance 800 PSI
SI
Air Grille Diffuser
Not directly related to the air conditioner engine,
it is installed to be able to control the direction of the wind to create air circulation and the temperature inside the area where the air conditioner is installed very well. It may have a circular or square appearance as well, which is mostly made from plastic or aluminum. It can also be coated with color or the size can be modified according to what the customer wants, etc.
Square shape, 1,2,3 or 4 directions, round shape.
Full thread stud
Stud Rod Stud bolt, nut, screw, long nut, long screw, steel threaded rod, stud. Stud
steel is designed to hold parts together, prevent parts from falling out and make it easy to disassemble. The advantage is that it can be permanently held or temporarily held very well. It is used a lot in automotive mechanics work. It can be applied to all types of work, such as cars, motorcycles, construction, house building, repairing water pipes, gutters, plumbing, anything thick, large, long that needs to be held together. DIY work, stud bolts are the answer.
